Amazing colours
We offer a world-class selection of rich and vibrant colors that have been rigorously tested to insure every roll is the same batch after batch.
Easy to print
We engineer our filaments to print in all open source 3D printers. We have seen clean & consistent results in a wide range of printers on the market. Tried and tested filament saves you time and money.
Laser guided Precision
Our manufacturing process insures industry leading +/-0.05mm tolerances. We use the latest laser guided optical micrometers that measures the filament multiple times a second. This gives free consistent printing performance first time every time.
Featured products
Granite FX PLA -1 KG
$24.95
Polyalchemy FX was born out of a desire to create more than just colored filaments.
We strived to deliver something a little different in hopes to spark creativity in our users.
This is only the beginning of the FX line and we will continue to experiment to bring you new and inspirational products in the near future.
What are the black spots?
- Material: synthetic hair fiber
- Particle size: 100 mesh or 0.15mm or less
What size/type of nozzle should use?
The black spots in FX PLA are non abrasive and don't require a special hardened nozzle. We recommend a nozzle size of 0.4mm and above.
Specifications
- Diameter: 1.75mm
- Tolerance:0.05 +/-
- Printing temperature: 195-215 C
- Printing plate: 0-60 degrees
- Weight: NW 1 KG
- Spool diameter: 200mm
- Hole Size: 49mm
Limestone FX PLA - 1 KG
$24.95
Polyalchemy FX was born out of a desire to create more than just colored filaments.
We strived to deliver something a little different in hopes to spark creativity in our users.
This is only the beginning of the FX line and we will continue to experiment to bring you new and inspirational products in the near future.
What are the black spots?
- Material: synthetic hair fiber
- Particle size: 100 mesh or 0.15mm or less
What size/type of nozzle should use?
The black spots in FX PLA are non abrasive and don't require a special hardened nozzle. We recommend a nozzle size of 0.4mm and above.
Specifications
- Diameter: 1.75mm
- Tolerance:0.05 +/-
- Printing temperature: 195-215 C
- Printing plate: 0-60 degrees
- Weight: NW 1 KG
- Spool diameter: 200mm
- Hole Size: 49mm
Sandstone FX PLA - 1 KG
$24.95
Polyalchemy FX was born out of a desire to create more than just colored filaments.
We strived to deliver something a little different in hopes to spark creativity in our users.
This is only the beginning of the FX line and we will continue to experiment to bring you new and inspirational products in the near future.
What are the black spots?
- Material: synthetic hair fiber
- Particle size: 100 mesh or 0.15mm or less
What size/type of nozzle should use?
The black spots in FX PLA are non abrasive and don't require a special hardened nozzle. We recommend a nozzle size of 0.4mm and above.
Specifications
- Diameter: 1.75mm
- Tolerance:0.05 +/-
- Printing temperature: 195-215 C
- Printing plate: 0-60 degrees
- Weight: NW 1 KG
- Spool diameter: 200mm
- Hole Size: 49mm
Walnut FX PLA - 1 KG
$24.95
Polyalchemy FX was born out of a desire to create more than just colored filaments.
We strived to deliver something a little different in hopes to spark creativity in our users.
This is only the beginning of the FX line and we will continue to experiment to bring you new and inspirational products in the near future.
What are the black spots?
- Material: synthetic hair fiber
- Particle size: 100 mesh or 0.15mm or less
What size/type of nozzle should use?
The black spots in FX PLA are non abrasive and don't require a special hardened nozzle. We recommend a nozzle size of 0.4mm and above.
Specifications
- Diameter: 1.75mm
- Tolerance:0.05 +/-
- Printing temperature: 195-215 C
- Printing plate: 0-60 degrees
- Weight: NW 1 KG
- Spool diameter: 200mm
- Hole Size: 49mm
Onyx Elixir 1 KG
$24.95
Elixir is blend of PLA and polymers that results in a stunning pearlescent shine that is unmatched by normal PLA, it's perfect for printing busts, vases or any model that needs to stand out.
We have worked hard to bring you what we believe is one of the best PLA’s on the market today. We are excited to see what you will create with Elixir PLA Blend.
Specifications
- Diameter: 1.75mm
- Tolerance:0.05 +/-
- Printing temperature: 205-220C
- Printing plate: 0-60 degrees
- Weight: NW 1 KG
- Spool diameter 200mm
- Hole Size 49mm
Follow
Address:1210, Block A, Jiahe Huaqiang Building, Shennan Middle Rd, Futian District, Shenzhen, China
Email:sales@polyalchemy.com
Phone:+86 15814795636
© 2021 Polyalchemy.
Powered by Shopify
