Polyalchemy FX was born out of a desire to create more than just colored filaments.
We strived to deliver something a little different in hopes to spark creativity in our users.
This is only the beginning of the FX line and we will continue to experiment to bring you new and inspirational products in the near future.
What are the black spots?
- Material: synthetic hair fiber
- Particle size: 100 mesh or 0.15mm or less
What size/type of nozzle should use?
The black spots in FX PLA are non abrasive and don't require a special hardened nozzle. We recommend a nozzle size of 0.4mm and above.
- Diameter: 1.75mm
- Tolerance:0.05 +/-
- Printing temperature: 195-215 C
- Printing plate: 0-60 degrees
- Weight: NW 1 KG
- Spool diameter: 200mm
- Hole Size: 49mm